1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. BMW Locksmith
  4. bmw renew key E and F series
AUTOHEX_BMW
2018-02-11T19:41:45Z
for everybody 🙂 use vvdi prog. all dumps tested and works fine  BMW cu Erom pentru VVdiprog.rar You have insufficient rights to see the content.
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Steve
2018-02-22T19:37:29Z
hello,
thanks for the unlock file, i have question the unlock files are for ews4 or ews5 firmware ?
AUTOHEX_BMW
2018-02-23T07:17:17Z
Not matter,both
Steve
2018-02-23T14:44:16Z
Hello,
You shore it doesn't matter? from what i see in this forum everybody complaining that the key function doesn't work, only when key in coil u can start the car?!
From what i heard a big chance that it's key firmware problem.......ews5 system keys can work on ews4 no problem, but ews4 system key can't work on ews5 System, so this is the reason for my question!
I am trying to test this, so i want to know what firmware its the one you provided ?

Thanks
AUTOHEX_BMW
2018-02-23T20:17:21Z
Test and report. I made virgin key for e90-868mhz, e60- comfort acces 868mhz, f01,f10...868mhz..all works fine, starting and remote.
Steve
2018-02-23T23:06:48Z
Sorry i forget to mention that the problems happening on FEM SYSTEM!
I will test but i need to know what firmware key files you provided ?
akslock
2018-02-26T05:02:11Z
I have also run into this problem several times. On f series fem with 433mhz. I never made the connection between ews4 and ews5, makes sense. good thinking. I have tried unlocking with vvdi key tool and vvdi prog with same results; only starts when held to column. If you have found a good flash file please share =p

Also I have used vvdi2 as well as autohex to do the job. Problem is definitely with the keys.
shox
  •  shox
  • 100% (Exalted)
  • Advanced Member
2018-03-01T17:08:24Z
original bmw keys, fem 434mhz have pcf7953-1900, chinese clones have pcf 7953 -1800. maybe there is a problem in this
akslock
2018-04-29T04:20:17Z
Originally Posted by: akslock 

Just found this
http://www.autokeys.us/p...details.php?item_id=3401 



Fyi these keys work. Programmed one to 2017 x5 yesterday.
alex001
2018-05-03T04:13:56Z
Yes. Tried it too but noticed something. It worked on 2016 BMW X1 and 2017 BMW X1 but doesn’t work on 2016 BMW 3 series.
rsachip
2018-09-06T20:41:12Z
Is it posible to renew keys by autohex if existing cas dump avalible?
useyourbrains
2018-09-07T07:06:07Z
Originally Posted by: rsachip 

Is it posible to renew keys by autohex if existing cas dump avalible?



No, but you can save key data and use that data to another cas.
Similar Topics
Users browsing this topic
    1. Microtronik Autohex II and Hexprog forum
    2. Autohex II BMW
    3. BMW Locksmith
    4. bmw renew key E and F series