1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II DME/DDE and CAS ISN
  4. FEM On Bench update firmware issue.
roxetteer
  •  roxetteer
  • 100% (Exalted)
  • Advanced Member Topic Starter
2018-02-08T11:50:52Z
Hello

I have a used FEM, no keys, no ISN and I want to install it on flooded car (FEM of car totally damaged). I have DDE ISN from flooded car.

Now...used FEM on bench, AH asks for update, updated FEM_GW but also asks for FEM_BODY...however I have no ignition ON to update it...wasnt this supposed to be fixed in 1.0.47?

Is there something I'm doing wrong here?
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Autohex_II_BMW
2018-02-08T13:06:36Z
hi,if you got error on fem_body update, please send teamviewer to support via skype they will help you on this.
roxetteer
  •  roxetteer
  • 100% (Exalted)
  • Advanced Member Topic Starter
2018-02-08T18:09:15Z
Thanks to support for fast reply and giving me so much info that was previously unknown to me.
achaccha
2018-02-10T09:42:10Z
Originally Posted by: roxetteer 

Hello

I have a used FEM, no keys, no ISN and I want to install it on flooded car (FEM of car totally damaged). I have DDE ISN from flooded car.

Now...used FEM on bench, AH asks for update, updated FEM_GW but also asks for FEM_BODY...however I have no ignition ON to update it...wasnt this supposed to be fixed in 1.0.47?

Is there something I'm doing wrong here?



Dear Friend
Is it possible to change used FEM to another vehicle?
what is the procedure?
it is possible that it is necessary to know the ISN of the used FEM.
thank you for your comment
roxetteer
  •  roxetteer
  • 100% (Exalted)
  • Advanced Member Topic Starter
2018-02-10T10:32:44Z
Yes it's possible...if you don't have ISN or key from donor FEM you can still unlock it, but you need to program new key to start using this FEM.
Steve
2018-02-14T18:16:00Z
I have the same problem, when trying to update fem_body getting 803c error!
Can we get a file to upload on advance mode instead of waiting for team viewer and good time for both party’s?.... some time you going to preform a service on site and in this case u basically stuck and loosing customer = money!
Please advice !!!
roxetteer
  •  roxetteer
  • 100% (Exalted)
  • Advanced Member Topic Starter
2018-02-27T16:43:45Z
Done another FEM on bench today...smooth process, everything went fine, changed ISN and VIN. FEM was from F30 auto gearbox however...so manual gearbox is still the issue for not unlocking several FEM coming from these type of cars.
BB Repairs
2018-03-05T15:56:23Z
Good day. I have the same problem with FEM of Manual F30. Have no key's. Anyone maybe have a selution how to get ignition on . On the bench.
I can not even do in the car. Still does not update FEM. This car has been with me for more than a week. I need to make 2 key's. And to make it worse. I can not move this car around. It has ELV
Thanks
BMWZG
  •  BMWZG
  • 100% (Exalted)
  • Advanced Member
2018-03-06T07:49:00Z
Tool32 : 1|G_CAS|steuern_klemmen||KL15_EIN
Gbyleveldt
2018-03-07T14:58:47Z
That switches on the car, yes, but still AH can’t flash the FEM. Tried that already.
AUTOHEX_BMW
2018-03-07T20:22:31Z
On cas4 i put ignition on bench on terminal 15 wakeup,give feed with 12v. Not know if on fem works same procedure
bawareca1
2018-03-12T13:29:28Z
I also have a FEM from 2014 328i auto, 803c error. Support tried something, but didnt work.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II DME/DDE and CAS ISN
  4. FEM On Bench update firmware issue.