Stupid question maybe .. Is it possible to code/flash IC to remove the above mentioned tamper dot on 2015 F15 .. original eeprom (160dowq) is missing, have the full dump though .
be great if there was a solution .. before I have to set fire to it .:)

Many thanks in advance ...

Tam

---

as I remember it is not, there is ID in eeprom
and there is no remulator for this one, if im not wrong.

If kombi is 2015 it is possible to be doable, as i recall only 35160wt is not possible to virginize. So you would need dumps for both 160dwq and for 95320 or whatever chip is next to it.
Normaly you read this 2 eeproms eraze firt two lines in 160dwq(mileage) and then delete vin in both chips. Afterthat just code kombi and you should be good.

If there is 36150dwt you mai nees origial eeprom and emulator. Or just eraze vin in both eeproms and code( if mileage in kombi is less than in car). This might work

Use original eeprom (not china one) virginize it - reflash with autohex and all will be fine..yust remember to disable "doip" protocol to be able flashing this cluster