BMW Vehicle Order Managment

One of advanced functions in Autohex II BMW is the FA Manager (Vehicle Order Editor),

BMW E Series stores the vehicle order in CAS, a backup of this information are stored in Light Module (LM) or FRM.

While BMW F series stores the vehicle order in Central Gateway (ZGW) and there is a backup copy in the CAS.

Autohex II can backup and restore these data from those Ecus, as well as it is able to save this important information in your local disk as a backup.

Basic Tasks in Autohex II FA Manager
Basic Tasks in Autohex II FA Manager

Basic tasks of this danced feature are:

  • Read FA from CAS and write them into the backup Ecu (LM, FRM) automatically (Backup function)
  • Read FA from the backup Ecu (LM,FRM) and write it into CAS (restore function)
  • Save the FA stored in CAS in your laptop, the file will be named by the VIN of the CAS
  • Write the saved FA in a file to the CAS

The above tasks are more than enough to do all the required jobs in BMW, like if you replace the CAS with a used one, you must use this function to write the correct FA in the new CAS.

Same if you have replaced the FRM, it is recommended to write a copy of the FA in this FRM for in case the CAS got damaged in the future, so you will have a correct backup FA.

Before we jump to the advanced function in FA manager, it is strongly recommended to always save the FA contents before you do any modification in the FA.

Advanced FA Manager

Autohex II Advanced FA Manager
Autohex II Advanced FA Manager

You can use this feature for BMW retrofit such adding or removing features in BMW car.

We made some restrictions for the safety usage of this function, you cannot change engine type, and you cannot change the production year, these two items are the most critical information in the FA.

We added a unique feature in this function to add more safety while using this feature, Autohex II will always notify you about the status of the FA is it is valid or not valid.

Notes:

  • Autohex II will store the modified Vehicle Order in CAS only, you must do the backup from the basic funtions window.
  • After a sucsseful modification of the Vehicle Order, you must encode the corresponding Ecus that will get affected by this modification.
Last Update: 8/1/2016