Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
View
Go to last post
Offline Willisodhiambo  
#1 Posted : 10 August 2019 23:26:39(UTC)
Willisodhiambo


Rank: Newbie

Reputation:

Groups: Registered
Joined: 27/06/2019(UTC)
Posts: 14
Kenya
Location: Nairobi

Was thanked: 5 time(s) in 2 post(s)
I have struggled with several blank Chinese keys thinking they were all bad. Hextag rejecting keys because they are not blank. checked keys with tango and they are blank. So I tried different positions. I notice it accepts keys in weird positions, sometimes on top of the tool. Each key is accepted in a totally different position from the other. Not good!! Lets improve this.

And I also notice keyless type of key has this problem. Normal remote key seems to have no problems most of the time.
Sponsor
HexTag/HexProg is the ultimate tool for BDM, Key renew and EEPROM Reset

Click here on HexTag for more info about HexProg Software

Offline Mol chaves  
#2 Posted : 12 August 2019 05:46:28(UTC)
Mol chaves


Rank: Newbie

Reputation:

Groups: Registered
Joined: 08/05/2019(UTC)
Posts: 7
Brazil
Location: Serra-ES

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
In my case ! last time I tried to program a 433 mini key ... I unlocked with another tools and hextag was reading as locked key... but tango was reading as unlocked key...
and the key was not programming to fem... so I renewed key with hextag and after that hextag read key as unlocked and it programmed to fem and worked all functions.
Offline Autohex_II_BMW  
#3 Posted : 17 August 2019 01:04:38(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 867
United Arab Emirates
Location: Dubai

Thanks: 417 times
Was thanked: 909 time(s) in 456 post(s)
Originally Posted by: Willisodhiambo Go to Quoted Post
I have struggled with several blank Chinese keys thinking they were all bad. Hextag rejecting keys because they are not blank. checked keys with tango and they are blank. So I tried different positions. I notice it accepts keys in weird positions, sometimes on top of the tool. Each key is accepted in a totally different position from the other. Not good!! Lets improve this.

And I also notice keyless type of key has this problem. Normal remote key seems to have no problems most of the time.


which series you are getting error E or F?
Offline Willisodhiambo  
#4 Posted : 22 August 2019 22:45:48(UTC)
Willisodhiambo


Rank: Newbie

Reputation:

Groups: Registered
Joined: 27/06/2019(UTC)
Posts: 14
Kenya
Location: Nairobi

Was thanked: 5 time(s) in 2 post(s)
E series. Not yet tried making key for F series
Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.