1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. Engine does not start after Porsche EDC17CP44 ECU cloning completes
kimyangbeum
2019-11-29T08:43:49Z
after Porsche EDC17CP44 ECU cloning completes
The engine does not start(it would rotate starter)
Fault code 1. Digital motor electronics copntrol unit fauit 2. Engine control unit blocked
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Andrzej
2019-11-29T12:04:50Z
Porsche PIWS III
zoranmadzar
2019-11-29T22:21:15Z
Send me ...full bdm data donor and ori ecus.

Inside : TRICORE SAK TC1797 internal flash

Return the original contents to the donor d and p flash !
how did you get it
kimyangbeum
2019-12-01T05:15:46Z
help with zoranmadzar
Normal operation
zoranmadzar thank you
Hassan
2019-12-01T06:43:30Z
Hi
Is normal ecu not start after cloning because no tool clone it full
Immo data in flash is in otp area
For make ecu work need move immo data from old to new
But this need others tools
zoranmadzar
2019-12-01T08:45:25Z
DONT TOUCH P-FLASH...OTP...NO CHANGE ANYTHING ON P_FLASH !!!
sakis
2019-12-06T19:03:17Z
so in Audi's seat's and vw group no cloning function just read and write
Autohex_II_BMW
2019-12-07T09:36:58Z
Originally Posted by: sakis 

so in Audi's seat's and vw group no cloning function just read and write



only some of the VAG models store Immo data in OTP portion.
sakis
2019-12-07T17:26:33Z
is it possible to have that information because if someone tries to clone these ECU's they will crashed.
Charles.soori
2019-12-10T01:27:07Z
Someone correct me if I'm wrong, I think all immo5 cannot be cloned. Immo data have to be transferred. I've done some med17.1 immo5 and always have to transfer immo data.
Hassan
2019-12-10T05:50:39Z
Hi
Yes best to transfer data from orog to donor
It will be solved
Search on google bcm2 on line
Is site you can pay for this service
Autohex_II_BMW
2019-12-10T06:23:00Z
Originally Posted by: Charles.soori 

Someone correct me if I'm wrong, I think all immo5 cannot be cloned. Immo data have to be transferred. I've done some med17.1 immo5 and always have to transfer immo data.



as we said above its not possible to transfer immo in otp portion on cloning, no cloning tool transfer otp portion you have to sync or make immo off with tool supporting it
Hassan
2019-12-10T08:03:21Z
Hi
Possible freind i did time agos edc17cp14 with the help bcm2
on line sevice transfer immo from orig to used
Transfer will be on eprom only
But need present flash only for decrypt data
I am sure about it
Thx
chang2
2019-12-12T22:59:16Z
Hello,

so there is no complete cloning?
BlackX
2020-02-08T09:09:33Z
No cloning. IMMO data is stored in the eeprom. eeprom is encrypted by key that is stored in flash OTP area. You need decrypt IMMO data transfer it to new ECU and crypt by new ECU key.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. Engine does not start after Porsche EDC17CP44 ECU cloning completes