1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. BMW Locksmith
  4. Change FEM
bawareca1
2018-01-31T05:16:33Z
So I finally got the first FEM to replace, but it looks like I cant find definitive instructions how to do it. I used the RESTORE function, but it doesnt seem to work.
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Autohex_II_BMW
2018-01-31T05:52:27Z
For replacing FEM why you wan't to do restoring from unlock function.this thread has been discussed before anyway please note the steps
1.unlock fem on bench using anyone of the 3 methods
2.Read DME ISN and write to FEM
3.match VIN inside FEM
4.restore Vehicle Order from original FEM or manually
5.do codding for fem from indiv codding
*If mileage is more than car mileage needs to do mileage reset too.
bawareca1
2018-01-31T13:28:44Z
I have the back-up and the secret file from the original FEM already, can I just use this files or i have to read the DME/DDE ISN no matter what?
Levanime
2018-01-31T17:06:50Z
use that secret file to extract DME/DDE ISN from original FEM
then just write it to replacement FEM (obviously you will need to unlock replacement FEM too)
bawareca1
2018-02-01T02:03:43Z
Well, I was left with the impression that "changing" the FEM means to make a clone and re-use the original keys and stuff from the bad FEM.
Levanime
2018-02-01T02:54:16Z
Originally Posted by: bawareca1 

Well, I was left with the impression that "changing" the FEM means to make a clone and re-use the original keys and stuff from the bad FEM.



I agree with you,
I just tried to interpret what support wrote :)
Steve
2018-02-16T18:41:08Z
Originally Posted by: Autohex_II_BMW 

For replacing FEM why you wan't to do restoring from unlock function.this thread has been discussed before anyway please note the steps
1.unlock fem on bench using anyone of the 3 methods
2.Read DME ISN and write to FEM
3.match VIN inside FEM
4.restore Vehicle Order from original FEM or manually
5.do codding for fem from indiv codding
*If mileage is more than car mileage needs to do mileage reset too.



When the mileage reset function will be ready will be ready?
Autohex_II_BMW
2018-02-17T06:00:55Z
mileage reset is already available for fem/bdc.cas models are under testing.
AUTOHEX_BMW
2018-02-17T09:40:17Z
For cas i can send you km calculator. Contact me Autohex_II_bmw. Is tested for all cas4, 1L,5M,1N masks
AutoDiagRO
2018-02-17T22:51:09Z
hello
where download km calculator for CAS ??
regards
abc123
  •  abc123
  • 100% (Exalted)
  • Advanced Member
2020-04-24T15:53:59Z
Can someone tell me what are the Update / Backup / Restore functions in the Advanced FEM/BDC Unlock - ELV Options ?
Autohex_II_BMW
2020-04-25T07:40:28Z
Originally Posted by: abc123 

Can someone tell me what are the Update / Backup / Restore functions in the Advanced FEM/BDC Unlock - ELV Options ?


in advanced update is will upgrade the ecu flash you need to use it when fem/bdc unlock gave you some error like ecu need to be updated for unlock.packages without indiv programming feature can do the update from advanced.
backup and restore is save data from eeprom of fem its necessary only if anything wrong happen while unlocking.
Similar Topics
Users browsing this topic
    1. Microtronik Autohex II and Hexprog forum
    2. Autohex II BMW
    3. BMW Locksmith
    4. Change FEM