Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
View
Go to last post
Offline CAT Motors  
#1 Posted : 01 August 2020 06:49:26(UTC)
CAT Motors


Rank: Newbie

Reputation:

Groups: Registered
Joined: 01/08/2020(UTC)
Posts: 1
Philippines

Good day Gents,

Hoping for some pointers if someone can spare some time & share their knowledge on the matter, highly appreciate it very much!

Car is 2014 BMW F10 520d
* Car has intermittent no start, idling but wont shift into gear.
* Lots of fault codes stored but cleared anyway, found to have the cas tampered with likely an emulator mounted inside cas
* vin-DY63671, CAS4 CG 5WK50722HBR
* CAS4+ (EWS5 Active)

Now, im going to get a used cas-module,
1. cas i use a different number besides this no. "5WK50722HBR" as long as CAS4 CG?
2. Main difference between CAS4 CG vs CAS4 CG +ELV
3. Should i be concerned with the message (EWS5 Active) during cloning & adding key at the same time?


Thank you & cheers!
Sponsor
HexTag/HexProg tool is the ultimate tool for Ecu Cloning/Ecu Tuning including MDG1 Ecu Cloning/MDG1 Ecu Tuning, BDM Read/write, Key renew and EEPROM Reset

Click here on HexTag for more info about HexProg Software

Offline PDXAutoworks  
#2 Posted : 01 August 2020 19:15:00(UTC)
PDXAutoworks


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 18/07/2019(UTC)
Posts: 50
United States
Location: Portland, Oregon

Thanks: 54 times
Was thanked: 19 time(s) in 12 post(s)
My experience with used CAS replacement has lead me to use BMW real oem and search the original CAS part number. It will bring up a list of all the compatible part numbers that can be used.
Offline Autohex_II_BMW  
#3 Posted : 03 August 2020 02:27:20(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 1,235
United Arab Emirates
Location: Dubai

Thanks: 517 times
Was thanked: 1236 time(s) in 643 post(s)
Originally Posted by: CAT Motors Go to Quoted Post
Good day Gents,

Hoping for some pointers if someone can spare some time & share their knowledge on the matter, highly appreciate it very much!

Car is 2014 BMW F10 520d
* Car has intermittent no start, idling but wont shift into gear.
* Lots of fault codes stored but cleared anyway, found to have the cas tampered with likely an emulator mounted inside cas
* vin-DY63671, CAS4 CG 5WK50722HBR
* CAS4+ (EWS5 Active)

Now, im going to get a used cas-module,
1. cas i use a different number besides this no. "5WK50722HBR" as long as CAS4 CG?
2. Main difference between CAS4 CG vs CAS4 CG +ELV
3. Should i be concerned with the message (EWS5 Active) during cloning & adding key at the same time?


Thank you & cheers!

cas4 ews 5 active means its CAS4+ so you please try to get a used CAS4+ with same MASk as original if you are planning to replace it with used.you can unlock the used CAS OBD from cas firmware option and before connecting to the car the used one make sure about to mileage if lower than car, if not then you can edit the mileage on bench in hextag before connecting to car.if you got more questions please feel free to contact our support team.
Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.