9389116 Corrupted flash? help · Microtronik Autohex II and Hexprog forum

Welcome Guest! To enable all features please Login or Register.

guseuro
51.4% (Neutral)
Newbie Topic Starter

2021-11-12T17:09:19Z

After performing a CAS repair through OBD it seems that I may have corrupted the Flash
None of the keys will recognized on the vehicle anymore.

I removed the CAS and used Bench Programmer and read the EEPROM and Flash

I attached the EEPROM and current Flash.

Can anyone help me? BIN.rar You have insufficient rights to see the content.

Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Wanna join the discussion?! Login to your Microtronik Autohex II and Hexprog forum forum account or Register a new forum account

Autohex_II_BMW
100% (Exalted)
Advanced Member

2021-11-13T08:51:42Z

Originally Posted by: guseuro

After performing a CAS repair through OBD it seems that I may have corrupted the Flash
None of the keys will recognized on the vehicle anymore.

I removed the CAS and used Bench Programmer and read the EEPROM and Flash

I attached the EEPROM and current Flash.

Can anyone help me? BIN.rar You have insufficient rights to see the content.

hello
your eeprom is in programming mode. Please change to normal mode in hexprog software then save and write eeprom back.Read again to confirm changes. Also you can write the attached flash.
938XX115.rar You have insufficient rights to see the content. programmign mode cas.png You have insufficient rights to see the content.