hy
i need to adapt cas 3 black on bmw e60 , original cas is cas2 white box beacause i want to make elv off in flash
i read both cas whith hextag prog eeprom and flash
please help to copy immo data form cas2 to cas 3
thanks cas 2 bmw e60.rar You have insufficient rights to see the content. cas3 bmw e60.rar You have insufficient rights to see the content.

This not possible. You should replace with same CAS

It is possible, I did myself upgrade from CAS2 to CAS3+ on an E60 2006. There is a trick though, I can give you more info on PM if you need

On e60 is possible to make without elv, on e90 work only from 2007/03 because until this year cas2 have D-ews and S-start, and after 2007 cas3 have only S-start

It is possible, I did myself upgrade from CAS2 to CAS3+ on an E60 2006. There is a trick though, I can give you more info on PM if you need

Please everyone, If you have a solution share it to everyone, no PM is recommended in this forum as it intends to help everyone here.

It's no secrecy but it depends on what ECU the car has, there's no universal solution. I spent a couple of weeks to solve this, you need a certain CAS3 dump, depending on case. I will not share the dumps but I can help the upgrade to CAS2 to CAS3 if you send me the ECUs and the car keys. Unfortunately I can't do it for free...

Mistake mate ...................goodbye

---

Problem solved
Pin 3 from cas to elv was short to ground
Put another wire from cas to elv and evrething is oj
Thanks to all