Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
View
Go to last post
Offline abc123  
#1 Posted : 30 July 2020 19:36:39(UTC)
abc123


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 01/06/2019(UTC)
Posts: 72
Canada

Thanks: 26 times
Was thanked: 24 time(s) in 13 post(s)
Hi all, I got the 8HP in F Series job on the table. Usually I clone them but the original and replacement TCM had different SWFLP and this will not allow me to clone. So, I did virgin on the table then, programming and coding on the table. Took it to the customer but the trans will not shift in any gear. Is there anything that needs to be done?

Car is 2014 F30 328i with FEM.

Thank You for your input.

Edited by user 30 July 2020 19:43:52(UTC)  | Reason: Not specified

Sponsor
HexTag/HexProg tool is the ultimate tool for Ecu Cloning/Ecu Tuning including MDG1 Ecu Cloning/MDG1 Ecu Tuning, BDM Read/write, Key renew and EEPROM Reset

Click here on HexTag for more info about HexProg Software

Offline Admin  
#2 Posted : 31 July 2020 04:24:03(UTC)
Admin

Rank: Administration

Reputation:

Groups: Administrators
Joined: 22/09/2015(UTC)
Posts: 142

Thanks: 140 times
Was thanked: 171 time(s) in 89 post(s)
Usually you need to check what faults the 8HP EGS has and follow up
Offline abc123  
#3 Posted : 31 July 2020 07:39:02(UTC)
abc123


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 01/06/2019(UTC)
Posts: 72
Canada

Thanks: 26 times
Was thanked: 24 time(s) in 13 post(s)
No fault codes, shifter is sending CAN messages to the TCM. Car was reprogrammed and encoded using the factory software after installing the TCM, all modules. Of course I did program it and encode it with Autohex after the virginising.

Edited by user 31 July 2020 08:04:28(UTC)  | Reason: Not specified

Offline alexkondraszow  
#4 Posted : 31 July 2020 08:45:59(UTC)
alexkondraszow


Rank: Newbie

Reputation:

Groups: Registered
Joined: 28/07/2020(UTC)
Posts: 4
Russian Federation

Was thanked: 1 time(s) in 1 post(s)
probably the transfer of the engine drive to the gearbox is mechanically damaged, a frequent case,
Offline abc123  
#5 Posted : 31 July 2020 09:14:21(UTC)
abc123


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 01/06/2019(UTC)
Posts: 72
Canada

Thanks: 26 times
Was thanked: 24 time(s) in 13 post(s)
Originally Posted by: alexkondraszow Go to Quoted Post
probably the transfer of the engine drive to the gearbox is mechanically damaged, a frequent case,


I was thinking about that but I think a trouble code would be present.
Offline Admin  
#6 Posted : 31 July 2020 14:45:18(UTC)
Admin

Rank: Administration

Reputation:

Groups: Administrators
Joined: 22/09/2015(UTC)
Posts: 142

Thanks: 140 times
Was thanked: 171 time(s) in 89 post(s)
Check sensors, solenoids values in live data/Actutations. Although any incorrect value will report a fault.
Offline abc123  
#7 Posted : 02 August 2020 12:35:16(UTC)
abc123


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 01/06/2019(UTC)
Posts: 72
Canada

Thanks: 26 times
Was thanked: 24 time(s) in 13 post(s)
Had to refund the customer. The EGS was still locked to the old car. Someone unlocked it for him remotely. It is working now.
Offline alexkondraszow  
#8 Posted : 02 August 2020 21:45:04(UTC)
alexkondraszow


Rank: Newbie

Reputation:

Groups: Registered
Joined: 28/07/2020(UTC)
Posts: 4
Russian Federation

Was thanked: 1 time(s) in 1 post(s)
yes there is a tool that can be done remotely. I have them . it works on all 8hp (f series). AH4 has to fix these functions. G series doesn't work as it should
Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.