Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
View
Go to last post
Offline emreoez  
#1 Posted : 18 February 2021 11:52:11(UTC)
emreoez


Rank: Newbie

Reputation:

Groups: Registered
Joined: 02/09/2019(UTC)
Posts: 2
Germany

Hello Guys,
got an F20 Manual Transmission with DEAD FEM.

Ordered an used one, Unlocked it with Option no Key, afterwards entered Correct VIN,ISN,FA, relearned Original Keys from Car and last but not least i used VIRGIN ELV File from Forum/Support.
Then flashed in Car to newest I-Level. Everything seemed fine, i could start the Car, Ignition, no Problems.

BUT THEN
On Day 2, i am able to unlock the car, but i get no Ignition, so cannot start. FEM only throws one Fault Code "0x8043A3 Elektrische Lenksäulenverriegelung (ELV): ELV-SG - Fehler H-Brücke".
I tried another ELV which i virginized but still the same thing.

Whats happening here?
Sponsor
HexTag/HexProg tool is the ultimate tool for Ecu Cloning/Ecu Tuning including MDG1 Ecu Cloning/MDG1 Ecu Tuning, BDM Read/write, Key renew and EEPROM Reset

Click here on HexTag for more info about HexProg Software

Offline Autohex_II_BMW  
#2 Posted : 20 February 2021 00:34:04(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 1,500
United Arab Emirates
Location: Dubai

Thanks: 590 times
Was thanked: 1410 time(s) in 750 post(s)
hi,
please make sure you write the elv virgin file to the elv eeprom correct. try read again the elv eeprom and make sure that.
Offline emreoez  
#3 Posted : 20 February 2021 01:33:22(UTC)
emreoez


Rank: Newbie

Reputation:

Groups: Registered
Joined: 02/09/2019(UTC)
Posts: 2
Germany

Originally Posted by: Autohex_II_BMW Go to Quoted Post
hi,
please make sure you write the elv virgin file to the elv eeprom correct. try read again the elv eeprom and make sure that.


its 100% correct, checked many times. still no unlocking of ELV -> therefore no ignition.
Offline Tombo  
#4 Posted : 10 March 2021 13:50:00(UTC)
Tombo


Rank: Member

Reputation:

Groups: Registered
Joined: 22/02/2017(UTC)
Posts: 25
United Kingdom
Location: Stoke-on-Trent

Thanks: 12 times
Was thanked: 20 time(s) in 11 post(s)
reset fem with option 3 in autohex. Like no key no isn. Then adjust isn and do new key. Reset elv with the file provided and everything will work.
thanks 2 users thanked Tombo for this useful post.
Offline Justin  
#5 Posted : 29 March 2021 11:45:27(UTC)
Justin


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 27/02/2016(UTC)
Posts: 131
United Kingdom
Location: London

Thanks: 39 times
Was thanked: 90 time(s) in 64 post(s)
Hi guys

I’m having the same issue after loading the virgin file onto the 95040 ELV chip. Unlocked used fem with option 3, swapped all data and info over. Still getting ‘ELV hardware fault’.
Support thought it might be an issue with the actual ELV, but I have now tried another unit, written the file, exactly the same issue ‘ELV hardware fault.
The FEM has been fully programmed and coded.
I have done several of these for manual cars now without any problems, so I’m not sure what the issue is.
Anyone have any ideas?
Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.