1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. Volkswagen MED17.5.25
Germlock
2021-09-21T18:46:27Z
Good day

I am having a problem with cloning MED17.5.25
I am reading ori ECU in factory mode and writing donor also in factory
P-Flash and D-Flash
Ori ECU starting the vehicle and donor ECU not starting
Am i missing something?

Regards
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

PDXAutoworks
2021-09-21T20:51:27Z
Did you try to back up and restore?
BMW File Service
VAG Immo Data Transfer
CipiCip
2021-09-22T05:25:27Z
Pfuuu....the topics here that VAG ecus can't be cloned are a lot...you missed something yes
VAG tricore CAN'T BE CLONED
IMMO DATA IS IN OTP PORTION
Autohex_II_BMW
2021-09-22T06:00:35Z
Originally Posted by: Germlock 

Good day

I am having a problem with cloning MED17.5.25
I am reading ori ECU in factory mode and writing donor also in factory
P-Flash and D-Flash
Ori ECU starting the vehicle and donor ECU not starting
Am i missing something?

Regards



https://www.microtronik....ccessful-VAG-ECU-cloning 
please refer the old threads.
abc123
  •  abc123
  • 100% (Exalted)
  • Advanced Member
2021-09-23T17:56:30Z
Does anyone know if Porsche falls into VAG (immo in OTP) category, no direct cloning possible? Asking specifically about Porsche Bosch MED17.1.6?

VBR
Autohex_II_BMW
2021-09-25T07:01:25Z
Originally Posted by: abc123 

Does anyone know if Porsche falls into VAG (immo in OTP) category, no direct cloning possible? Asking specifically about Porsche Bosch MED17.1.6?

VBR



yes VAG/Porsche both store immo data in otp portion.
sixcode
2021-09-26T18:11:23Z
here is a other pointer, immo level WFS4, WFS5 can be cloned by merging immo data, WFS6 and up NOT
ALSO you need SAME donor so HW BUILD, BOSCH number must match

in short for example, HW18 to HW25 does only work if you do "update" SVM coding online else car will start but with ecu errors


abc123
  •  abc123
  • 100% (Exalted)
  • Advanced Member
2021-09-28T03:16:21Z
Originally Posted by: sixcode 

here is a other pointer, immo level WFS4, WFS5 can be cloned by merging immo data, WFS6 and up NOT
ALSO you need SAME donor so HW BUILD, BOSCH number must match
in short for example, HW18 to HW25 does only work if you do "update" SVM coding online else car will start but with ecu errors



I found a few times that the SW version must be the same. You can read with VAG Com SW Version 4 digits.

sixcode
2021-10-03T09:58:01Z
Originally Posted by: abc123 

Originally Posted by: sixcode 

here is a other pointer, immo level WFS4, WFS5 can be cloned by merging immo data, WFS6 and up NOT
ALSO you need SAME donor so HW BUILD, BOSCH number must match
in short for example, HW18 to HW25 does only work if you do "update" SVM coding online else car will start but with ecu errors



I found a few times that the SW version must be the same. You can read with VAG Com SW Version 4 digits.



software does not need to match as you use ori flash in donor, if not you need to edit brand and powerclass "if" you use "immo off"

immo/OTP IN eeprom only
Similar Topics
Users browsing this topic
    1. Microtronik Autohex II and Hexprog forum
    2. HexProg Programming Tool
    3. HexProg Intro
    4. Volkswagen MED17.5.25