Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

2 Pages<12
Options
View
Go to last post
Offline Mariusz  
#21 Posted : 02 February 2019 12:30:56(UTC)
Mariusz


Rank: Member

Reputation:

Groups: Registered
Joined: 25/11/2018(UTC)
Posts: 21
United Kingdom
Location: London

Thanks: 1 times
Was thanked: 5 time(s) in 4 post(s)
Ok so after spending whole day working on the car have some bad/good news. First have another update, customer mistaken ZGW with CAS and I was mislead about that. Orginal CAS was in the car. So now what was done
-I did fit correct ZGW and restore from orginal cas
-than fitted new cas prepared with both DME
-coded all to the car

so car had replaced parts fitted
-cas4+
-both DME
-ZGW
-battery power distribution module(I don't know if that's important but this been taken from different model of F10 not M5)
-new key coded to match

now car starts fine but.... :( there is issues which need sorting
-there is no display both on navi and clocks when ignition is on only aircon panel work rest of dash is dead. can this be due to coding or something else(car is from auction repair after accident damage).
-need to reset EGS and this will be the biggest challenge. does anyone know somebody who can reset/virginise EGS from M5 f10 with cas4+(ews5 active) DCT gearbox(is not 8HP box!!!) and mostly I need help with this issue

-engine runs rough(sounds constant but not full power/all cylinders)
-there was no headlights fitted, customer bring pair from different car. After coding low beam work fine, no high beam/no angel eyes/ no indicators)

now I have following fault codes
on 1 DME
201201 DME protection against tampering.Program or data manipulation detected
cd9634 FlexRay message(servotronic status 241.0.2) missing
cda322 message (units BN2020, 252.0.4) missing, DME receiver ,KOMBI transmitter
cda804 no message (relative time , 0x328) missing, ,DME receiver ,KOMBI transmitter
cdb204 message (ambient temperature ,0x2CA) missing, DME receiver ,KOMBI transmitter
10b104 outside temperature sensor signal CAN message faulty
cdb504 no message (kilometre reading/range 0x330) missing, DME receiver ,KOMBI transmitter
cdae04 no message (time display/date 0x2F8) missing, DME receiver ,KOMBI transmitter

on dme 2
1f2c08 DME slave incorrect data record power monitoring
201201 201201 DME slave protection against tampering.Program or data manipulation detected
1b0a21 rough road detection no wheel speed signal received
cde804 no message (relative time 0x328) missing, DME receiver ,KOMBI transmitter
cdf504 no message (kilometre reading/range 0x330) missing, DME receiver ,KOMBI transmitter

on HUD
d85404 message (control lcd brightness 0x393)incorrect receiver head up display transmitter instrument panel
d85407 message (kilometre reading 0x330) incorrect receiver head up display transmitter instrument panel
message (display instrument panel 0x1B3) not up to date receiver head up display transmitter instrument panel

on DSC
d017a3 DSC interface (actual number of sensor edges wheel 64.1.2) signal invalid
d017c5 interface DCT(actual speed wheel 46.0.1) signal invalid
d01428 message (ambient temperature 252.1.4)missing receiver ICM transmitter instrument panel
d014f2 message (kilometre reading/range 276.4.8) missing receiver ICM transmitter instrument panel
d0158c message (relative time 276.2.8) missing receiver ICM transmitter instrument panel
d016dc message (status display of driving dynamics 97.1.2) missing receiver ICM transmitter instrument panel
d018b5 message (status display instrument panel 97.0.2) missing receiver ICM transmitter instrument panel
d02c67 DSC interface (status DSC stabilisation 47.1.2)signal invalid
d01932 message (time/date 276.6.8) missing receiver ICM transmitter instrument panel

on ZGW
801c20 ZGM central fault memory full -no control-unit fault

FRM
800f8c turn light left faulty
800f8d turn light right faulty
e58507 integrated chassis management transmitter interface (vehicle speed 0x1a1) signal invalid
e58c3e driver side exterior mirror local interconnect network bus communication fault
e58c3f front passenger side exterior mirror local interconnect network bus communication fault
e58c42 switch block drivers door LIN bus communication fault
e58c44 switch block seat memory LIN bus communication fault
800fc8 lin bus headlight driver module(tms) left communication fault
800fc9 lin bus headlight driver module(tms) right communication fault

also following ecu not responding
AMPT
ASD
KOMBI
TCB
HU_NBT
SVT


all others connect and flashed fine

Now anyone up to for this jigsaw lol? So how to get this most importand things done
flash egs isn
make engine run correctly
bring display to life
get headlights to work correct??

All help suggestions deeply appreciated :)


if there is other way around by crack encryption in cas4+ I have orginal cas and key ordered from bmw by vin just if someone can somehow get isn from cas I can edit DME's again and at last problem with gearbox will be sorted ;)

Edited by user 02 February 2019 12:40:54(UTC)  | Reason: Not specified

Users browsing this topic
2 Pages<12
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.