1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II DME/DDE and CAS ISN
  4. ISN on DDE 8
molixcr
  •  molixcr
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-01-24T00:51:33Z
Hi friends anyone knows how connect a boot pin on DDE 8, is a F15 2015 X35d. ECU Label DDE 8 586 540 5ed205c9-f6bf-44f2-b69e-2f4c7f1fd7bd.jpg You have insufficient rights to see the content.
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Autohex_II_BMW
2019-01-24T05:41:24Z
please select DDE741 in ISN boot mode.you will get the connection diagram and boot pin over there.
molixcr
  •  molixcr
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-01-26T18:26:36Z
I tried but the circuit board is really diferent. I don't know the right point of boot cable
Autohex_II_BMW
2019-01-27T05:31:32Z
Originally Posted by: molixcr 

I tried but the circuit board is really diferent. I don't know the right point of boot cable



no its the same , maybe you don't have latest update of autohex.
 DDE741 HW4.png You have insufficient rights to see the content.
molixcr
  •  molixcr
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-01-31T15:58:08Z
How can update my ISN Boot software? My autohex say "AUTOHEX II 4" on backside
Autohex_II_BMW
2019-02-02T07:22:01Z
Originally Posted by: molixcr 

How can update my ISN Boot software? My autohex say "AUTOHEX II 4" on backside



you don't have dde741 in your list?
molixcr
  •  molixcr
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-02-08T18:06:18Z
Yeah I have but my picture is different. I tray update but is the same... Can I how update ISN mode software? My autohex software is 1.0.54.... When try read ISN with the DDE 741 plugin say that conn.jpg You have insufficient rights to see the content. error.jpg You have insufficient rights to see the content. What's wrong?
Levanime
2019-02-09T00:35:05Z
do you have communication with DDE in car?
Autohex_II_BMW
2019-02-09T07:06:45Z
Originally Posted by: molixcr 

Yeah I have but my picture is different. I tray update but is the same... Can I how update ISN mode software? My autohex software is 1.0.54.... When try read ISN with the DDE 741 plugin say that conn.jpg You have insufficient rights to see the content. error.jpg You have insufficient rights to see the content. What's wrong?



please send photo for the full board of dme.Looks like your connection is wrong
molixcr
  •  molixcr
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-02-13T01:21:33Z
 DDE8.jpg You have insufficient rights to see the content. ECU comunicate right
Autohex_II_BMW
2019-02-13T07:09:56Z
its dde 741.please check the attached connection DDE741 HW4.png You have insufficient rights to see the content. diagram its there in isn boot mode software also
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II DME/DDE and CAS ISN
  4. ISN on DDE 8