Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
View
Go to last post
Offline erik328  
#1 Posted : 14 February 2020 15:15:29(UTC)
erik328


Rank: Newbie

Reputation:

Groups: Registered
Joined: 14/02/2020(UTC)
Posts: 2
United States
Location: Iowa

I am now the proud owner of a Hextag programmer, well it being shipped to me as I type! I'm excited to get to work but I'm new to this whole thing and need some advice . I have a msv 80.1 from a BMW that I need to cloned and am wanting to do it on a bench. My question is what power source to use? I have a regulator on its way but am unsure what amp/volts/watts I will need to order for a power supply in order to program it. Also once i have it, what volts and amps I should use in order to clone the DME. Any tips for how to run the power wires from the regulator to the DME ie any special hardware for the small pins. Thank you so much! I'm looking forward to learning all the great stuff the hextag can do!
Sponsor
HexTag/HexProg tool is the ultimate tool for Ecu Cloning/Ecu Tuning including MDG1 Ecu Cloning/MDG1 Ecu Tuning, BDM Read/write, Key renew and EEPROM Reset

Click here on HexTag for more info about HexProg Software

Offline Autohex_II_BMW  
#2 Posted : 14 February 2020 22:21:43(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 1,365
United Arab Emirates
Location: Dubai

Thanks: 549 times
Was thanked: 1304 time(s) in 689 post(s)
Originally Posted by: erik328 Go to Quoted Post
I am now the proud owner of a Hextag programmer, well it being shipped to me as I type! I'm excited to get to work but I'm new to this whole thing and need some advice . I have a msv 80.1 from a BMW that I need to cloned and am wanting to do it on a bench. My question is what power source to use? I have a regulator on its way but am unsure what amp/volts/watts I will need to order for a power supply in order to program it. Also once i have it, what volts and amps I should use in order to clone the DME. Any tips for how to run the power wires from the regulator to the DME ie any special hardware for the small pins. Thank you so much! I'm looking forward to learning all the great stuff the hextag can do!

hi,
for hextag on bench operation please use a 12V 2-2.5A AC/DC adapter.you will get the wiring harness along with hextag package to connect to ECU only thing you need to get is a power adapter.when it comes to MSV80.1 if you are getting any error to read it on factory mode you need to add some components if it is missing on your ECU.all details you will get in software itself and if you got any questions feel free to contact us we got support via SKYPE/WHATSAPP.
thanks 2 users thanked Autohex_II_BMW for this useful post.
Offline erik328  
#3 Posted : 18 February 2020 12:00:57(UTC)
erik328


Rank: Newbie

Reputation:

Groups: Registered
Joined: 14/02/2020(UTC)
Posts: 2
United States
Location: Iowa

Thank you for the prompt response! I just received the hextag! It did not come with any software or instructions, is there a site I need to go to in order to get the software? Also, I see it has a power jack on the back next to where the USB comes in, I'm assuming this is where I plug my power source into in order to power up the device and the DME?
Offline Autohex_II_BMW  
#4 Posted : 18 February 2020 22:35:52(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 1,365
United Arab Emirates
Location: Dubai

Thanks: 549 times
Was thanked: 1304 time(s) in 689 post(s)
Originally Posted by: erik328 Go to Quoted Post
Thank you for the prompt response! I just received the hextag! It did not come with any software or instructions, is there a site I need to go to in order to get the software? Also, I see it has a power jack on the back next to where the USB comes in, I'm assuming this is where I plug my power source into in order to power up the device and the DME?


you can contact our support team for any doubts and instructions and also installation instructions was provided along with the tracking number of package itself.for the power supply use any 12V 2A AC/DC adapter good quality one.
Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.