Autohex II Software Update News

HexProg Software Version 1.0.25

Release Date: 9/8/2020

Ecu cloning and Ecu tuning checksum correction has been added, More EDC16X Factory mode are supported, more MDG1 Ecus are supported!

HexProg Software Version 1.0.24

Release Date: 7/29/2020

Ecus with MPC5XX MCUs like EDC16 and ME9/MEV9, Continental SIMOS 18 and Ford Continental SID209 unlock issue corrected, more Supported EEPROM...

AutoHex II BMW Diagnostic Software Version 1.0.61

Release Date: 7/18/2020

Repair Faulty BDC2_Gateway and BDC3_Gateway automatically while calculating vehicle order, initialize Flexray automatically, Security Access for latest models

AutoHex II BMW Diagnostic Software Version 1.0.60

Release Date: 7/7/2020

More ISN in factory mode, we support more Ecus with this method. I01,I12 and I15 are supported in Diagnose and programming and other functions...

HexProg Software Version 1.0.23

Release Date: 5/31/2020

New Ecus for VAG: MD1CS004, Simos 12.1, Simos 12.2. New Ecus for Mercedes Benz: Continental SID307,SID310 and more Ecus for different models

HexProg Software Version 1.0.22

Release Date: 4/20/2020

Opel, Nissan, Renault and Dacia Continental SID307, SID309, and SID310 is ready in this version. We also corrected issues in SIMOS18.XX

HexProg Software Version 1.0.21

Release Date: 4/11/2020

Ecus with ST10 Micro-controllers are supported started from this release (ME7.X.X, Ecus). Fixed some issues in older versions.

HexProg Software Version 1.0.20

Release Date: 3/9/2020

Audi/VW MDG1 MG1CS002, MD1CP004, MD1CP014. ISUZU EDC17C83 factory mode. Optimized the new Power Module to work with Hextag.

HexProg Software Version 1.0.19

Release Date: 3/3/2020

Continental PSA SID208 is ready in boot and factory modes, as well as Hyundai/Kia EDC17C57, MED17.9.30, MEG17.9.2, MED17.9.30

HexProg Software Version 1.0.18

Release Date: 2/24/2020

Mercedes Benz Continental SIM271DE20,SIM271KE20 Factory mode, Ford Continental EMS2204,EMS2207,EMS2211,SID209 and other Ecus have been added

AutoHex II BMW Diagnostic Software Version 1.0.59

Release Date: 2/17/2020

ISN read/write for MDG1 like DME_83T1, DDE803, DME88T0, DDE803P, DME_88T0, DME_84T0. And ISN read/write factory mode for MSx8X

HexProg Software Version 1.0.16

Release Date: 2/10/2020

MDG1 read/write is ready in this version, as well reading BMW ISN for MD1/MG1. MSV80, MSD80/81, MSD85, MSD87 and MSV90 read/write by Factory mode.

AutoHex II BMW Diagnostic Software Version 1.0.58

Release Date: 11/30/2019

BMW F Series and G Series Programming data and coding data have been updated. More G series models are supported in this update

HexProg Software Version 1.0.15

Release Date: 11/27/2019

32 more Ecus in 8 cars models come to HexProg in version 1.0.15, like EDC17CP17, EDC17C47,EDC17C60,EDC17C73,EDC17CP07,EDC17CP17,EDC17CP37,ME17.9.52

HexProg Software Version 1.0.14

Release Date: 11/10/2019

Hextag now has 19 more Ecus in the cloning list added on 13 different models. Also SIMOS 18.X is more stable in this version.

HexProg Software Version 1.0.13

Release Date: 11/3/2019

42 new supported in this version like Alfa Romeo EDC17C69, Ferrari MED17.3.5, McLaren ME17.8.32, Bentley ME17.1.1 and mode

AutoHex II BMW Diagnostic Software Version 1.0.57

Release Date: 10/27/2019

EGS 6HP F series EWS Reset, CAS4 unlock by OBD, ISN factory mode for MED17.2, MEV17.2 and MEVD17.23

HexProg Software Version 1.0.12

Release Date: 10/3/2019

Delphi CRD3X, CRD3S2, CRD3E1, CRD3PX are in Hexprog. MINI MEV17.2.2 and Audi/VW EDC17CP04, EDC17CP14, EDC17C46

HexProg Software Version 1.0.11

Release Date: 9/18/2019

VW and Audi SIMOS18.0, SIMOS18.1, SIMOS18.2 and MED17.1 are supported, Ford SID807 and Peugeot EDC17C10 are supported too

HexProg Software Version 1.0.10

Release Date: 9/12/2019

MSV90, MSD85, MSD87 and MSD81 are more stable for cloning, Power supply monitor has been improved, EDC17CP09 has been added

HexProg Software Version 1.0.8

Release Date: 9/10/2019

Ecu cloning and tuning starts to be supported in this version. Also many other keys rest have been added to the supported list

AutoHex II BMW Diagnostic Software Version 1.0.56

Release Date: 5/22/2019

MEVD1723 ISN reading by ISN factory mode is available now. More EGS EWS reset versions added for F and G series. USB Driver has been improved

AutoHex II BMW Diagnostic Software Version 1.0.55

Release Date: 5/7/2019

ISN factory mode is a new function from Autohex to read/write ISN and working hours without opening the DME/DDE, we also update flash data for F and G series

HexProg Software Version 1.0.6

Release Date: 4/22/2019

Test keys function has been added, more porsche keys reset added, fixing some keys EROM, fixing EEPROM reset for mileage

HexProg Software Version 1.0.5

Release Date: 4/7/2019

Added Land Rover new BCM, Key renew for many brands like Audi,Hyundai, Kia, Renault, Land Rover,and more. Update function enhanced for slow internet

HexProg Software Version 1.0.4

Release Date: 3/27/2019

NXP PCF family Key renew function for BMW, MINI and Porsche , EEPROM reset for BMW KOMBI, EEPROM read/write for other brands

AutoHex II BMW Diagnostic Software Version 1.0.54

Release Date: 2/2/2019

Autohex II FEM and BDC clone is available in this version, delete key from CAS4,CAS4+, FEM and BDC is available in this version

HexProg Software Version 1.0.3

Release Date: 1/10/2019

New MCUs are supported like Renesas V850 series and NXP/Freescale HC08. Added new modules for read write flash and eeprom like BCM in Audi

HexProg Software Version 1.0.2

Release Date: 12/18/2018

Added FRM repair for FRM3, added new modules for BMW body, added a module in Mercedes benz

AutoHex II BMW Diagnostic Software Version 1.0.53

Release Date: 11/26/2018

major improvment in ENET programming for NBT, KOMBI and other MOST network, improving BDC and FEM unlock, fixing FA calculation

AutoHex II BMW Diagnostic Software Version 1.0.52

Release Date: 10/23/2018

Update flashing and coding for F and G series, FA manager can copy from KOMBI, REM, CAS, Programming IDE was updated

AutoHex II BMW Diagnostic Software Version 1.0.51

Release Date: 8/26/2018

Read and write ISN for MSD85, MSD87 and MSV90 in BMW F series, BMW G series coding was corrected, Update all data flash.

AutoHex II BMW Diagnostic Software Version 1.0.50

Release Date: 4/11/2018

MEV1723 and EDC17C76 can read, write and reset working hours. FEM and BDC unlocking function has the option to update FEM/BDC

AutoHex II BMW Diagnostic Software Version 1.0.49

Release Date: 3/12/2018

Using ENET protocol you can flash HU_NBT, and HU_CIC safely with Autohex II HW4, Programming for ENET was enhanced

AutoHex II BMW Diagnostic Software Version 1.0.48

Release Date: 1/14/2018

BMW G series: G01, G02, G11, G12, G31 and G38 can program and encode Ecus. Mileage reset for FEM/BDC is avialble in this version

AutoHex II BMW Diagnostic Software Version 1.0.47

Release Date: 12/20/2017

ZGW and Gateway Auto recovery, Solving the issue when unlocking FEM/BDC on bench without a working key, Solving Dependency problem with FEM

AutoHex II BMW Diagnostic Software Version 1.0.46

Release Date: 12/4/2017

Advanced Option for FEM Unlock Function, ENET is more stable especially for programming NBT ,CIC, KOMBI, and other MOST network ECUs

AutoHex II BMW Diagnostic Software Version 1.0.45

Release Date: 11/12/2017

More support for FEM and BDC for unlocking and restoring data, BMW FEM and BDC Change VIN, as well as BDC and FEM read ISN

AutoHex II BMW Diagnostic Software Version 1.0.44

Release Date: 8/20/2017

New Window for BMW Configurations is added, Expert mode programming is an option in these configuration. FEM and BDC Key programming are ready for HW4

AutoHex II BMW Diagnostic Software Version 1.0.43

Release Date: 6/19/2017

AutoHex II BMW Software Version 1.0.43: Added manual coding for F series. EGS 8HP EWS reset has been released

AutoHex II BMW Diagnostic Software Version 1.0.42

Release Date: 5/1/2017

Autohex II BMW version 1.0.42: Update for flashing in BMW F series, fixing EGS flashing in E65, More DME ISN in F series

AutoHex II BMW Diagnostic Software Version 1.0.41

Release Date: 2/20/2017

BMW ISN by OBD for DMEs, Autohex II WVCI HW3 USB is more stable, new coding and Ecu programming data, fixing some new DME coding.

AutoHex II BMW Diagnostic Software Version 1.0.40

Release Date: 10/31/2016

BMW Diagnostic Software Version 1.0.40: MSD80,MSD81,MSD85 ISN read and write boot mode is ready, Enhancing CAS Firmware, correct some DSC coding in Mini Cooper

AutoHex II BMW Diagnostic Software Version 1.0.39

Release Date: 10/9/2016

BMW Diagnostic Software Version 1.0.39: Update for BMW F series flash data, Update for coding in BMW F series, Adding more DDE for ISN reading by boot mode

AutoHex II BMW Diagnostic Software Version 1.0.38

Release Date: 9/21/2016

BMW Diagnostic Software Version 1.0.38: ISN Boot mode for Tricore CPUs ,FA Manager for F series are available in this version

AutoHex II BMW Diagnostic Software Version 1.0.37

Release Date: 8/27/2016

BMW Diagnostic Software Version 1.0.37: Ready for WVCI HW3, Enhanced EGS ISN, and fixing a flashing problem

AutoHex II BMW Software Version 1.0.36

Release Date: 7/31/2016

Autohex II BMW Software Version 1.0.36: update of programming and coding for E series, fixing an issue in DSC coding in E84, and some more enhancements

AutoHex II Program For BMW Version 1.0.35

Release Date: 7/10/2016

Autohex II BMW version 1.0.35 comes with the FA manager advanced mode, you can do Retrofit by this added feature

AutoHex II Program For BMW Version 1.0.34

Release Date: 6/27/2016

Autohex II BMW version 1.0.34 update notes: Programming Ecu in F series is faster, Vehicle order function can save and load FA in / from files

AutoHex II Program For BMW Version 1.0.33

Release Date: 6/2/2016

Autohex II BMW version 1.0.33 update notes: BMW E series programming data has updating, fixed minor issue in ISN MSD85

AutoHex II Program For BMW Version 1.0.32

Release Date: 4/30/2016

.In this version the Ecu programming in F series (flash data) has been updated, also Rolls Royce 2016 is supported

AutoHex II Program For BMW Version 1.0.31

Release Date: 4/18/2016

Ecu coding of F series has been updated for latest data, this version also fixed some issues of Ecu coding.

AutoHex II Software For Hyundai Version 1.0.28

Release Date: 3/28/2016

Mileage correction extended for latest models in Hyundai

AutoHex II Software For Kia Version 1.0.28

Release Date: 3/28/2016

Mileage correction extended for latest models in Kia

AutoHex II Program For BMW Version 1.0.30

Release Date: 3/14/2016

This program Update for BMW made diagnose is faster, and we removed some resrtictions from CAS Firmware

AutoHex II Program For BMW Version 1.0.29

Release Date: 3/1/2016

Enhancments in BMW E and F series like fixing bugs, supporting BMW F015, BMW F025 for Ecu programming, enhancing On Bench functions

AutoHex II Program For BMW Version 1.0.28

Release Date: 1/10/2016

This update has new program for BMW Ecu Programming in E series, also manual coding has been added, as well as On Bench is supported

AutoHex II Program For BMW Version 1.0.27

Release Date: 11/1/2015

DME2 (DME Address 13) ISN can be modified for BMW F series, Key Programming for EWS5 was enhanced, enhancments in coding

AutoHex II Software For BMW Version 1.0.26

Release Date: 10/14/2015

Autohex II BMW Program update,The BMW key programmer Htag Pro is available in this version

AutoHex II Software For BMW Version 1.0.25

Release Date: 10/4/2015

Autohex II BMW Program update, new features like changing ISN (SK) into DME itself, and imptoved Key Programming functions

AutoHex II Software For Hyundai Version 1.0.25

Release Date: 10/2/2015

Autohex II Hyundai software update, it has new service functions and some bugs fixing

AutoHex II Software For Kia Version 1.0.25

Release Date: 10/2/2015

Autohex II Kia software update, it has new service functions and some bugs fixing

AutoHex II Software For BMW Version 1.0.24

Release Date: 9/4/2015

This diagnose software version has improvment in BMW Ecu programming E series