Hexprog II Ecu Programming Tool Software 1.0.106
Hexprog II
Hexprog II Tuner software version 1.0.106 is available for Hextag, Hexprog and Hexprog II users.
Following Ecus/Tcus are available in this version:
- Fiat/Lancia Marelli 8GMB, 8GSF, 8GSW Bench and Boot.
- Volvo Bosch ME7.0.
- Mitsubishi Marelli IAW 4CM.
- Toyota Bosch M7.9.5.
- Jeep/Chrysler Continental EGS53.
We also corrected some checksums issues as well as some protocols bugs.
Hexprog II Ordering Page: Hexprog II
You can check or download Hexprog II supported Ecu list
Join our Facebook Group for more technical info Facebook Hexprog II Group
8GMB
| Vehicle | Model | Engine |
|---|---|---|
| FIAT | 500 | 1.4 16v MultiAir (105) |
8GSF
| Vehicle | Model | Engine |
|---|---|---|
| FIAT | 500 | 0.9 TwinAir 5MT (85 hp) |
| FIAT | 500 | 0.9 TwinAir 6MT (105 hp) |
| FIAT | 500C | 0.9 TwinAir 5MT (85 hp) |
| FIAT | 500C | 0.9 TwinAir 6AT (85 hp) |
| FIAT | 500C | 0.9 TwinAir 6MT (105 hp) |
| FIAT | 500L | 0.9 TwinAir 6MT (105 hp) |
| FIAT | 500L | 0.9 TwinAir 6MT (85 hp) |
| FIAT | Panda | 0.9 8v TwinAir Turbo 90 4x4 |
| FIAT | Punto | 0.9 16v TwinAir Turbo 105 |
| FIAT | Punto | 0.9 16v TwinAir Turbo 85 |
| Lancia | New Ypsilon | 900 Twin Air Turbo |
8GSW
| Vehicle | Model | Engine |
|---|---|---|
| FIAT | Panda | 0.9 8v Natural Power |
| FIAT | Panda | 0.9 8v TwinAir Turbo 85 |
| FIAT | Panda | 0.9 8v TwinAir Turbo 90 |
