Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
View
Go to last post
Offline Milkyway  
#1 Posted : 07 April 2021 03:16:05(UTC)
Milkyway


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 04/05/2018(UTC)
Posts: 71
Germany
Location: Buende

Thanks: 1 times
Was thanked: 17 time(s) in 9 post(s)
Hello!

I've to flash a BMW DME 17.2.G directly on bench. Can someone give me the diagram to connect the DME?

I've here a coding station with CAS emulator and ZGW or a connected FEM with key.

CU Oliver
Sponsor
HexTag/HexProg tool is the ultimate tool for Ecu Cloning/Ecu Tuning including MDG1 Ecu Cloning/MDG1 Ecu Tuning, BDM Read/write, Key renew and EEPROM Reset

Click here on HexTag for more info about HexProg Software

Offline keyproggdynia  
#2 Posted : 07 April 2021 04:34:08(UTC)
keyproggdynia


Rank: Member

Reputation:

Groups: Registered
Joined: 18/09/2020(UTC)
Posts: 26

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
this type of programming is done flexray. you must have a ZGW, with ZGW you must connect to the driver but not via can l and can h. this link is read, there are other pins for programming.
Offline keyproggdynia  
#3 Posted : 07 April 2021 04:36:46(UTC)
keyproggdynia


Rank: Member

Reputation:

Groups: Registered
Joined: 18/09/2020(UTC)
Posts: 26

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
this type of programming is done flexray. you must have a ZGW, with ZGW you must connect to the driver but not via can l and can h. this link is read, there are other pins for programming.check it out on newtis.info but you have to buy an access
Offline Milkyway  
#4 Posted : 07 April 2021 05:41:51(UTC)
Milkyway


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 04/05/2018(UTC)
Posts: 71
Germany
Location: Buende

Thanks: 1 times
Was thanked: 17 time(s) in 9 post(s)
Hello!

I will not need any newtis, I have access to ISTA (and sgate, Air a.s.o.). :)

So only the two flexray wires and not the CAN H and CAN L? And power supply of course.

CU Oliver
Offline keyproggdynia  
#5 Posted : 07 April 2021 05:53:22(UTC)
keyproggdynia


Rank: Member

Reputation:

Groups: Registered
Joined: 18/09/2020(UTC)
Posts: 26

Thanks: 1 times
Was thanked: 2 time(s) in 2 post(s)
find in dme / dde two pins marked in ista as programming. connect them between the driver and the Zgw. zgw to autohex via flexray. and of course 12v for everything. you will program dme / dde anyway
Offline Autohex_II_BMW  
#6 Posted : 07 April 2021 23:25:38(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 1,500
United Arab Emirates
Location: Dubai

Thanks: 590 times
Was thanked: 1410 time(s) in 750 post(s)
Originally Posted by: Milkyway Go to Quoted Post
Hello!

I've to flash a BMW DME 17.2.G directly on bench. Can someone give me the diagram to connect the DME?

I've here a coding station with CAS emulator and ZGW or a connected FEM with key.

CU Oliver


Please see the attached diagram for MEVD1728 along with FEM made by one of our customer. MEVD172G pin out will be different from it but it will help you to identify what all pin need to be used.
fem and dme.png (143kb) downloaded 27 time(s).
thanks 1 user thanked Autohex_II_BMW for this useful post.
Offline Milkyway  
#7 Posted : 09 April 2021 04:12:50(UTC)
Milkyway


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 04/05/2018(UTC)
Posts: 71
Germany
Location: Buende

Thanks: 1 times
Was thanked: 17 time(s) in 9 post(s)
Hello!

Thx. As I can see, the DME 17.2.G has Flexray on Pin 33 and 34 on connector 1b and PT-Can on Pin 7 and 8. B+ is on 45 and ground on Pin 4 in 5b. So I will test it in this way and will report.

CU Oliver
Users browsing this topic
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.