Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

2 Pages12>
Options
View
Go to last post
Offline Carprogrammer  
#1 Posted : 26 January 2019 14:14:45(UTC)
Carprogrammer


Rank: Newbie

Reputation:

Groups: Registered
Joined: 29/03/2017(UTC)
Posts: 7
United Kingdom

Thanks: 1 times
Was thanked: 6 time(s) in 3 post(s)
I went through almost all CAS programmers and I can easily say HexTag is very good.
I have done couple CAS4 with it without any errors.
I like the speed and built in calculator which make life easier. FRM 3 is doing in few seconds.
Also tested on Mercedes W211 EIS and all went well.

As Im very optimistic with it I would like to make this my main programmer not only for BMW.
This is my short list of the modules hopefully added in the future.

* Jaguar Land Rover KVM/RFA
* Audi KESSY
* Crafter EZS
* Mini Big Clock ( HC12DG128A)
* BMW EWS3 and EWS4
* Renew some BMW keys
* All Mercedes EZS
* 35160/35128WT - read chip Id and erase first line.
Sponsor
HexTag/HexProg is the ultimate tool for BDM, Key renew and EEPROM Reset

Click here on HexTag for more info about HexProg Software

Offline Autohex_II_BMW  
#2 Posted : 26 January 2019 21:34:32(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 902
United Arab Emirates
Location: Dubai

Thanks: 426 times
Was thanked: 955 time(s) in 472 post(s)
Originally Posted by: Carprogrammer Go to Quoted Post
I went through almost all CAS programmers and I can easily say HexTag is very good.
I have done couple CAS4 with it without any errors.
I like the speed and built in calculator which make life easier. FRM 3 is doing in few seconds.
Also tested on Mercedes W211 EIS and all went well.

As Im very optimistic with it I would like to make this my main programmer not only for BMW.
This is my short list of the modules hopefully added in the future.

* Jaguar Land Rover KVM/RFA
* Audi KESSY
* Crafter EZS
* Mini Big Clock ( HC12DG128A)
* BMW EWS3 and EWS4
* Renew some BMW keys
* All Mercedes EZS
* 35160/35128WT - read chip Id and erase first line.

Thank you for your feedback sir,really appreciate it.we will try to add all the controls listed above in the very near future.
Offline cardiagcom  
#3 Posted : 27 January 2019 11:16:59(UTC)
cardiagcom


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 26/03/2017(UTC)
Posts: 138
United Kingdom
Location: Blackburn

Thanks: 40 times
Was thanked: 69 time(s) in 37 post(s)
PL2FRM3 BMW E90 Read D-flash and erase eeprom with sector choice please add
Offline Autohex_II_BMW  
#4 Posted : 27 January 2019 22:22:30(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 902
United Arab Emirates
Location: Dubai

Thanks: 426 times
Was thanked: 955 time(s) in 472 post(s)
Originally Posted by: cardiagcom Go to Quoted Post
PL2FRM3 BMW E90 Read D-flash and erase eeprom with sector choice please add


If you want to repair frm3 just connect in hextag and click on repair.nothing else need to be done.
thanks 3 users thanked Autohex_II_BMW for this useful post.
Offline RocketSurgeon  
#5 Posted : 28 January 2019 00:25:39(UTC)
RocketSurgeon


Rank: Member

Reputation:

Groups: Registered
Joined: 10/01/2019(UTC)
Posts: 33
United States
Location: NC

Was thanked: 22 time(s) in 10 post(s)
I too would love to see BMW Key unlock, especially WK49863 since that's a common one that hasn't been done yet. Reusing OEM keys on the cheap is awesome.
Airbag module reset would be a very nice feature.
I look forward to all the DME/DDE features as well.
thanks 1 user thanked RocketSurgeon for this useful post.
Offline zoranmadzar  
#6 Posted : 02 February 2019 08:34:03(UTC)
zoranmadzar


Rank: Member

Reputation:

Groups: Registered
Joined: 02/11/2017(UTC)
Posts: 26
Macedonia

Thanks: 19 times
Was thanked: 18 time(s) in 8 post(s)
Hi Sir
BMW E60
VTG module
part.number: 7552614
inside MCU : MC9S12DG256: mask 2K79X
same to CAS 2
=================================================
I had a case.
autohex tool do not recognize the module....same ISTA D ...
ISTA P and AUTOHEX CANt go to PROGRAMMING MOD ... BOOTH MODE....
I REWRITE FLASH BDM ... THAN PROGRAMMING WITH AUTOHEX ALL IS DONE...
I see HEXTAG have this MCU OPTION READ /WRITE
CAN GOOD
ADD OPTION IN YOUR SW ...
zoran madzar
Offline Charles.soori  
#7 Posted : 04 February 2019 20:17:01(UTC)
Charles.soori


Rank: Newbie

Reputation:

Groups: Registered
Joined: 11/12/2018(UTC)
Posts: 1
Canada

Thanks: 6 times
Originally Posted by: Autohex_II_BMW Go to Quoted Post
Originally Posted by: cardiagcom Go to Quoted Post
PL2FRM3 BMW E90 Read D-flash and erase eeprom with sector choice please add


If you want to repair frm3 just connect in hextag and click on repair.nothing else need to be done.


If dflash is corrupted then press repair eeprom doesn't work. This happens to me. I had to use vvdi prog to read dflash and fix eeprom manual.
Offline Autohex_II_BMW  
#8 Posted : 04 February 2019 21:28:30(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 902
United Arab Emirates
Location: Dubai

Thanks: 426 times
Was thanked: 955 time(s) in 472 post(s)
Originally Posted by: Charles.soori Go to Quoted Post
Originally Posted by: Autohex_II_BMW Go to Quoted Post
Originally Posted by: cardiagcom Go to Quoted Post
PL2FRM3 BMW E90 Read D-flash and erase eeprom with sector choice please add


If you want to repair frm3 just connect in hextag and click on repair.nothing else need to be done.


If dflash is corrupted then press repair eeprom doesn't work. This happens to me. I had to use vvdi prog to read dflash and fix eeprom manual.


what was the error you got on repair?
Offline e46M3dave  
#9 Posted : 05 February 2019 08:53:41(UTC)
e46M3dave


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 02/11/2016(UTC)
Posts: 60
United States
Location: New York

Thanks: 8 times
Was thanked: 27 time(s) in 16 post(s)
I would like to see HEXTAG support 6HP & 8HP read/write. We should be able to read this EGS from bench using hex tag and write to a used EGS. I am not sure about other markets but here in the USA its a problem with the early F series with 6HP and older E with 8HP. So please consider adding this feature to HexTag, with mileage & VIN data as with CAS/FEM modules.


Also add all AIRBAG modules reset. We need these for all BMW/Mini models.


thanks
Offline Autohex_II_BMW  
#10 Posted : 05 February 2019 22:21:14(UTC)
Autohex_II_BMW


Rank: Advanced Member

Reputation:

Groups: Moderator
Joined: 22/08/2015(UTC)
Posts: 902
United Arab Emirates
Location: Dubai

Thanks: 426 times
Was thanked: 955 time(s) in 472 post(s)
Originally Posted by: e46M3dave Go to Quoted Post
I would like to see HEXTAG support 6HP & 8HP read/write. We should be able to read this EGS from bench using hex tag and write to a used EGS. I am not sure about other markets but here in the USA its a problem with the early F series with 6HP and older E with 8HP. So please consider adding this feature to HexTag, with mileage & VIN data as with CAS/FEM modules.


Also add all AIRBAG modules reset. We need these for all BMW/Mini models.


thanks


EGS is already supported in autohex for reset,so there is no need of adding it in hextag.
thanks 1 user thanked Autohex_II_BMW for this useful post.
Offline bawareca1  
#11 Posted : 06 February 2019 19:15:02(UTC)
bawareca1


Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2017(UTC)
Posts: 44

Thanks: 129 times
Was thanked: 26 time(s) in 12 post(s)
Originally Posted by: e46M3dave Go to Quoted Post
I would like to see HEXTAG support 6HP & 8HP read/write. We should be able to read this EGS from bench using hex tag and write to a used EGS. I am not sure about other markets but here in the USA its a problem with the early F series with 6HP and older E with 8HP. So please consider adding this feature to HexTag, with mileage & VIN data as with CAS/FEM modules.


Also add all AIRBAG modules reset. We need these for all BMW/Mini models.


thanks


Which airbag modules you cannot reset with ista?
Offline e46M3dave  
#12 Posted : 07 February 2019 10:00:32(UTC)
e46M3dave


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 02/11/2016(UTC)
Posts: 60
United States
Location: New York

Thanks: 8 times
Was thanked: 27 time(s) in 16 post(s)

Which airbag modules you cannot reset with ista?



I am talking about crash data. ISTA cannot remove crash data. Need BDM tool for this.
Offline bawareca1  
#13 Posted : 08 February 2019 05:01:27(UTC)
bawareca1


Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2017(UTC)
Posts: 44

Thanks: 129 times
Was thanked: 26 time(s) in 12 post(s)
Originally Posted by: e46M3dave Go to Quoted Post

Which airbag modules you cannot reset with ista?



I am talking about crash data. ISTA cannot remove crash data. Need BDM tool for this.


Well, I have resets hundreds of NA Mini and BMW crashes with ISTA. BMW documents state that up to 2 crash telegrams could be erased.
thanks 2 users thanked bawareca1 for this useful post.
Offline BMWZG  
#14 Posted : 08 February 2019 06:20:44(UTC)
BMWZG


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 15/09/2016(UTC)
Posts: 70
Poland
Location: ZG

Thanks: 105 times
Was thanked: 48 time(s) in 26 post(s)
But after 3 crash you need BDM...
thanks 2 users thanked BMWZG for this useful post.
Offline Admin  
#15 Posted : 08 February 2019 08:20:06(UTC)
Admin

Rank: Administration

Reputation:

Groups: Administrators
Joined: 22/09/2015(UTC)
Posts: 100

Thanks: 109 times
Was thanked: 130 time(s) in 67 post(s)
Originally Posted by: BMWZG Go to Quoted Post
But after 3 crash you need BDM...

First of all thanks to bawareca for this info.
And I would like to ask BMWZG a question. You want to use an airbag has an accident 3 times again?
thanks 4 users thanked Admin for this useful post.
Offline gearboxny  
#16 Posted : 08 February 2019 18:39:47(UTC)
gearboxny


Rank: Newbie

Reputation:

Groups: Registered
Joined: 23/07/2016(UTC)
Posts: 13
United States
Location: NYC

Thanks: 3 times
Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: BMWZG Go to Quoted Post
But after 3 crash you need BDM...


Code is 93D5 - Three crash telegrams stored
Offline BMWZG  
#17 Posted : 09 February 2019 03:46:59(UTC)
BMWZG


Rank: Advanced Member

Reputation:

Groups: Registered
Joined: 15/09/2016(UTC)
Posts: 70
Poland
Location: ZG

Thanks: 105 times
Was thanked: 48 time(s) in 26 post(s)
Originally Posted by: Admin Go to Quoted Post
Originally Posted by: BMWZG Go to Quoted Post
But after 3 crash you need BDM...

First of all thanks to bawareca for this info.
And I would like to ask BMWZG a question. You want to use an airbag has an accident 3 times again?

Good question , but tell me : are there any important contraindications in addition to marketing (after all there is a need to sell a new Airbag control unit) ? During the accident damage or wear is subject to pyrotechnics, the control unit itself does not. Why manufacturer programming the exchange time after 3 accidents and not after 1 or 10 ? And don't tell me from safety reasons because in that case control unit shuld be replaced after any accidents not after third.

Edited by user 09 February 2019 03:53:51(UTC)  | Reason: Not specified

thanks 2 users thanked BMWZG for this useful post.
Offline bawareca1  
#18 Posted : 09 February 2019 09:08:06(UTC)
bawareca1


Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2017(UTC)
Posts: 44

Thanks: 129 times
Was thanked: 26 time(s) in 12 post(s)
Originally Posted by: Admin Go to Quoted Post
Originally Posted by: BMWZG Go to Quoted Post
But after 3 crash you need BDM...

First of all thanks to bawareca for this info.
And I would like to ask BMWZG a question. You want to use an airbag has an accident 3 times again?


Module may be Ok, but who wants to use this car after 3 crash telegrams :-))
I once was called to reset the airbag for Mini with ~3k miles. I start ISTA and see 3 crash telegrams, dont believe my eyes. After interrogation of the shop, they finally confess that they called someone to fix it. Instead of 3 minutes with ISTA, it took a few days to find the correct dump and finish the job.
thanks 1 user thanked bawareca1 for this useful post.
Offline RocketSurgeon  
#19 Posted : 09 February 2019 16:39:04(UTC)
RocketSurgeon


Rank: Member

Reputation:

Groups: Registered
Joined: 10/01/2019(UTC)
Posts: 33
United States
Location: NC

Was thanked: 22 time(s) in 10 post(s)
My understanding is that the ability to clear crash data depends on the number of deployed SRS components. Once 3 major SRS components fire, data can no longer be cleared with ISTA. At that point, BDM programming becomes the only option.
thanks 1 user thanked RocketSurgeon for this useful post.
Offline bawareca1  
#20 Posted : 10 February 2019 09:20:02(UTC)
bawareca1


Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2017(UTC)
Posts: 44

Thanks: 129 times
Was thanked: 26 time(s) in 12 post(s)
Originally Posted by: RocketSurgeon Go to Quoted Post
My understanding is that the ability to clear crash data depends on the number of deployed SRS components. Once 3 major SRS components fire, data can no longer be cleared with ISTA. At that point, BDM programming becomes the only option.


This is partially true for Mercedes, not BMW. 1 accident=1 crash telegram, regardless of how many modules have been deployed.
When I bought my '12 X5 all airbags, seat belts and buckles were deployed. I just reset the module after all elements were replaced.
thanks 3 users thanked bawareca1 for this useful post.
Users browsing this topic
2 Pages12>
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.